80 cm steel wall anchor with hook per piece

With the introduction of the new European regulations EN 1004, the use of a stabiliser on a room scaffold has become mandatory. With the Quickstab®, your room scaffolding complies with these regulations and you can work safely in accordance with legislation.

Product information

Quickstab® folding scaffold stabiliser

The Euroscaffold Quickstab® has been specially developed for attachment to folding scaffolding with a width of 75cm. With the introduction of the new European regulations EN 1004, the use of a stabiliser on a folding scaffold has become compulsory. With the Quickstab®, your scaffolding meets these regulations and you can work safely in accordance with the law.

The Quickstab® is easy to attach and works effectively. The extension legs are easy to assemble, dismantle and adjust in height. You can order the Quickstab® separately and add it to your existing set. In addition to the Quickstab®, Scaffold Sales has several stabilisers in its range varying in size.

Quickstab parts included

• 2 x Folding scaffold stabiliser
• 1 x Fixing tube stabiliser
• 2 x Locking clips

* For 1 folding scaffold, you need 2 sets

Article number: A50302

50 cm steel wall anchor with hook per piece

Scaffolding / Wall anchor 50 cm with hook

Wall anchoring or scaffolding securing to secure scaffolding to the wall or facade of a building.

Product information

Anchors on the facade make the scaffolding more stable. They are required from a working floor height of 8 metres for scaffolding erected outdoors. From a height of 2 metres, apply anchors to each frame at least every 4 metres. Anchor with angled or swivel couplers to both frames (on uprights or rungs). Only use couplers that are suitable for aluminium tubes with a diameter of 50.8 mm and do not damage the tube. If possible, also anchor below these heights and in strong winds.

Anchors should provide a solid and rigid connection between scaffolding and facade. The structure or building must be capable of absorbing the forces. Anchor to a structure or building only at suitable locations and preferably in full stone. ALWAYS anchor when using screening materials, canopies and billboards.

Should 50 cm be insufficient, there is also an 80 cm wall brace, see article 40272.

Article code: 100397

50 cm steel wall anchor with hook per piece

Scaffolding / Wall anchor 50cm with hook

Safe working at height. With this scaffold securing / wall anchor you secure your rolling scaffold to a wall. This is required by law for rolling scaffolds with a platform height of 8 meters or more or at wind force 6 or higher.

Product information

Anchors on the facade make the scaffolding more stable. They are required from a working floor height of 8 metres for scaffolding erected outdoors. From a height of 2 metres, apply anchors to each frame at least every 4 metres. Anchor with angled or swivel couplers to both frames (on uprights or rungs). Only use couplers that are suitable for aluminium tubes with a diameter of 50.8 mm and do not damage the tube. If possible, also anchor below these heights and in strong winds.

Anchors should provide a solid and rigid connection between scaffolding and facade. The structure or building must be capable of absorbing the forces. Anchor to a structure or building only at suitable locations and preferably in full stone. ALWAYS anchor when using screening materials, canopies and billboards.

If 80 cm is too long, there is also a 50 cm wall lock, see article 100397.

Item number: 40272